HP StorageWorks P2000 HP StorageWorks P2000 G3 MSA System CLI Reference Guide - Page 101
rescan, Description, Syntax, Example
View all HP StorageWorks P2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
rescan Description This command forces rediscovery of attached disks and enclosures. If both Storage Controllers are online this command also reassigns enclosure IDs based on controller A's enclosure cabling order. A manual rescan may be needed after system power-up to display enclosures in the proper order. A manual rescan is not required to detect when disks are inserted or removed; the controllers do this automatically. When disks are inserted they are detected after a short delay, which allows the disks to spin up. When you perform a manual rescan, it temporarily pauses all I/O processes, then resumes normal operation. Syntax rescan Example Scan for device changes and re-evaluate enclosure IDs: # rescan Success: Command completed successfully. HP StorageWorks P2000 G3 MSA System CLI Reference Guide 101