HP StorageWorks P2000 HP StorageWorks P2000 G3 MSA System CLI Reference Guide - Page 221
show system-parameters, Maximum Vdisks Per Controller
View all HP StorageWorks P2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 221 highlights
show system-parameters Description Shows the current settings for the storage system. Syntax show system-parameters Output ULP Enabled Shows that the system is using Unified LUN Provisioning Host Profiles Enabled Shows whether host profiles are enabled, which determines whether LUN 0 can be assigned to volume mappings. Number of Host Ports Number of host-interface ports in the controller enclosure Maximum Disks Number of disks that the system supports Maximum Volumes Number of volumes that the system supports Maximum Vdisks Number of vdisks that the system supports Maximum LUNs Number of LUNs that the system supports Maximum Vdisks Per Controller Number of vdisks that each controller supports Local Controller ID of the controller you are accessing Serial Number Last five digits of the midplane serial number. Example Show current settings for the storage system: # show system-parameters System Parameters ULP Enabled: true Host Profiles Enabled: true Number of Host Ports: value Maximum Disks: value Maximum Volumes: value Maximum Vdisks: value Maximum LUNs: value Maximum Vdisks Per Controller: value Local Controller: A Serial Number: SN See also • set volume • set vdisk HP StorageWorks P2000 G3 MSA System CLI Reference Guide 221