HP StorageWorks P2000 HP StorageWorks P2000 G3 MSA System CLI Reference Guide - Page 185
Show port information for a system with two FC ports
View all HP StorageWorks P2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
MAC(S) iSCSI only. Secondary MAC address. This field is only displayed during failover. Example Show port information for a system with two FC ports: # show host-parameters Ports Media Target ID Status Speed(A) Speed(C) A1 FC(L) WWPN Up 8Gb Auto Topo(C) PID ------------ Loop 0 A2 FC(-) WWPN Disconnected Auto Topo(C) PID ------------ Loop Show port information for a system with two iSCSI ports: # show host-parameters Ports Media Target ID Status Speed(A) Speed(C) A1 iSCSI IQN Up 1Gb 1Gb IP-Ver PIP PIP-Gateway PIP-Netmask MAC Address IPv4 10.134.9.100 10.134.0.1 255.255.0.0 00:C0:FF:29:00:24 A2 iSCSI IQN Up 1Gb 1Gb IP-Ver PIP PIP-Gateway PIP-Netmask MAC Address IPv4 10.134.9.101 10.134.0.1 255.255.0.0 00:C0:FF:29:00:23 See also • set host-parameters • show ports HP StorageWorks P2000 G3 MSA System CLI Reference Guide 185