HP StorageWorks P2000 HP StorageWorks P2000 G3 MSA System CLI Reference Guide - Page 246
verify remote-link, Port ID on the local system.
View all HP StorageWorks P2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 246 highlights
verify remote-link Description Verifies that the local system can communicate with a specified remote system. The remote system must already have been added by using the create remote-system command. Syntax verify remote-link remote-system system [link-type FC|iSCSI|ALL] Parameters remote-system system The remote system's name or the IP address of one of its controller network ports. link-type FC|iSCSI|ALL Optional. Specifies the type of host-port links to verify: • FC: Verify FC-to-FC links only. • iSCSI: Verify iSCSI-to-iSCSI links only. • ALL: Verify all FC-to-FC and iSCSI-to-iSCSI links. If this parameter is omitted, all links are verified. Output Port Port ID on the local system. Type • FC: FC port. • iSCSI: iSCSI port. • Offline: Port is disconnected. Remote Links IDs of linked ports on the remote system. Example Verify all links between two FC-only systems: # verify remote-link remote-system System2 Port Type Remote Links A2 FC A2,B2 B2 FC A2,B2 Verify only iSCSI links between two FC/iSCSI systems: # verify remote-link remote-system System2 link-type iSCSI Port Type Remote Links A4 iSCSI A4,B4 B4 iSCSI A4,B4 See also • show remote-systems 246