HP StorageWorks P2000 HP StorageWorks P2000 G3 MSA System CLI Reference Guide - Page 67
delete all-snapshots
View all HP StorageWorks P2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
delete all-snapshots Description Deletes all snapshots associated with a specified volume. All data associated with the snapshots is deleted and their space in the snap pool is freed for use. The specified volume can be a master volume or a snap pool. Syntax delete all-snapshots volume volume [delete-type all-standard-snapshots|all-replication-snapshots |all-snapshot-types] Parameters volume volume Name or serial number of the master volume or snap pool. For volume syntax, see Command syntax on page 22. delete-type all-standard-snapshots|all-replication-snapshots |all-snapshot-types Optional; for remote-replication enabled systems only. Type of snapshots that can be deleted. If this parameter is omitted, the default is all-standard-snapshots. This means that the command will try to delete only standard snapshots and will not succeed if replication snapshots exist. Example Delete all snapshots associated with master volume MV1: # delete all-snapshots volume MV1 Info: This may take a few minutes if the system is under heavy load... Success: Command completed successfully. (MV1) - All snapshots were deleted. Delete all replication snapshots associated with master volume MV2: # delete all-snapshots volume MV2 delete-type all-replication-snapshots Info: This may take a few minutes if the system is under heavy load... Success: Command completed successfully. (MV2) - All snapshots were deleted. See also • show snapshots • show volumes HP StorageWorks P2000 G3 MSA System CLI Reference Guide 67