HP StorageWorks P2000 HP StorageWorks P2000 G3 MSA System CLI Reference Guide - Page 109
set advanced-settings, fails. The default is - power supply
View all HP StorageWorks P2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
set advanced-settings Description For API use, sets advanced system configuration options. Syntax set advanced-settings [auto-write-back enabled|disabled|on|off] [background-scrub enabled|disabled|on|off] [compact-flash-failure enabled|disabled|on|off] [controller-failure enabled|disabled|on|off] [dynamic-spares enabled|disabled|on|off] [emp-poll-rate rate] [fan-failure enabled|disabled|on|off] [host-cache-control enabled|disabled|on|off] [missing-lun-response notready|illegal] [partner-firmware-upgrade enabled|disabled|on|off] [partner-notify enabled|disabled|on|off] [power-supply-failure enabled|disabled|on|off] [smart enabled|disabled|on|off|detect-only] [super-cap-failure enabled|disabled|on|off] [sync-cache-mode immediate|flush] [temperature-exceeded enabled|disabled|on|off] [utility-priority low|medium|high] [spin-down enabled|disabled|on|off] [spin-down-delay delay] Parameters auto-write-back enabled|disabled|on|off Optional. Sets whether the cache mode automatically changes to write-back after the trigger condition is cleared. background-scrub enabled|disabled|on|off Optional. Sets whether vdisks are automatically checked for disk defects to ensure system health. The interval between background scrub finishing and starting again is 24 hours. compact-flash-failure enabled|disabled|on|off Optional. Sets whether the cache policy automatically changes to write-through when CompactFlash memory fails. controller-failure enabled|disabled|on|off Optional. Sets whether the cache policy automatically changes to write-through when a controller fails. The default is disabled. dynamic-spares enabled|disabled|on|off Optional. Sets whether the storage system will automatically designate a properly sized disk having Available status as a spare. emp-poll-rate rate Optional. Sets the interval at which the storage system polls the EC (EMP) for status changes, from 5-3600 seconds. The default is 5 seconds. fan-failure enabled|disabled|on|off Optional. Sets whether the cache policy automatically changes to write-through when a fan fails. host-cache-control enabled|disabled|on|off Optional. Sets whether the host can modify the cache setting. The default is disabled. HP StorageWorks P2000 G3 MSA System CLI Reference Guide 109