HP Superdome SX2000 User Service Guide, Seventh Edition - HP Integrity Superdo - Page 152
DATE Command, Example B-4 CP Command, DATE Command - Set Date and Time., DC - Default Configuration
View all HP Superdome SX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
NOTE: This is for display only, no configuration is possible with this command. Example B-4 CP Command DATE Command DATE Command - Set Date and Time. • Access level-Administrator • Scope-Complex This command changes the value of the real time clock chip on the MP. Example B-5 DATE Command DC Command DC - Default Configuration • Access level-Administratrix • Scope-Complex This command resets some or all of the configuration parameters to their default values. NOTE: The clock setting is not effected by the DC command. The following example shows the various parameters and their defaults. 152 Management Processor Commands
NOTE:
This is for display only, no configuration is possible with this command.
Example B-4 CP Command
DATE Command
DATE Command - Set Date and Time.
•
Access level—Administrator
•
Scope—Complex
This command changes the value of the real time clock chip on the MP.
Example B-5 DATE Command
DC Command
DC - Default Configuration
•
Access level—Administratrix
•
Scope—Complex
This command resets some or all of the configuration parameters to their default values.
NOTE:
The clock setting is not effected by the DC command.
The following example shows the various parameters and their defaults.
152
Management Processor Commands