HP Superdome SX2000 User Service Guide, Seventh Edition - HP Integrity Superdo - Page 154
DI Command, Example B-7 DF Command, DI - Disconnect Remote or LAN Console
View all HP Superdome SX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Example B-7 DF Command DI Command DI - Disconnect Remote or LAN Console • Access level-Operator • Scope-Complex This command initiates separate remote console or LAN console disconnect sequences. For the remote console, the modem control lines are deasserted, forcing the modem to hang up the telephone line. For the LAN console, the telnet connection is closed. If the console being disconnected has an access mode of single connection (see ER command), then it is disabled, otherwise it remains enabled after the connection is dropped. The number after the LAN console status is the number of LAN connections. There is one active RS232 port connection to the service processor's textual user interface. This RS232 connection is called the local RS232 port. The local RS232 port connects to a local terminal or to the CE laptop. 154 Management Processor Commands