HP Superdome SX2000 User Service Guide, Seventh Edition - HP Integrity Superdo - Page 180
Powering On the System Using the PE Command, C-14
View all HP Superdome SX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
5. Examine the bulk power supply (BPS) LEDs (Figure C-14). When on, the breakers on the PDCA distribute power to the BPSs. Power is present at the BPSs when: • The amber LED labeled AC0 Present is on (if the breakers are on the PDCA on the left side at the back of the cabinet). • The amber LED labeled AC1 Present is on (if the breakers are on the PDCA on the right side at the back of the cabinet). Figure C-14 BPS LEDs Powering On the System Using the PE Command To power on the system, follow these steps: 1. From the Command Menu, enter the pe command. IMPORTANT: If the complex has an IOX cabinet, power on this cabinet first. In a large complex, power on the cabinets in one of the two following orders: • 9, 8, 1, 0 • 8, 9, 0, 1 2. Enter B and then the cabinet number (Figure C-15). 180 Powering the System On and Off