HP Surestore Disk Array 12h HP SureStore E Disk Array 12H User's and Service M - Page 113
Troubleshooting, Module Slot Numbers, Module Status Lights
View all HP Surestore Disk Array 12h manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Troubleshooting Chapter 5. Troubleshooting This chapter describes how to troubleshoot the disk array if a failure is indicated by module status lights or control panel messages. Module Slot Numbers Each module has a slot number which can be displayed in control panel messages (see Figure 5). The index number is embossed near each module slot. The indexes for the disk modules have two parts: column letter A or B and row numbers 1 through 6. Module Status Lights Each module has a status light located on its front panel (see Figure 4). Table 5 through Table 8 list the status light indications and actions for each of the modules. NOTE! The control panel status light changes from amber (testing) to green (ready) during power-on self-test, and then blinks with bus activity. The primary array controller (x or y) appears on the control panel display when the array is ready to service a read/write request and is ready for all normal I/O activity. Depending on the number of disk modules in the array and the spin-up times for the disks, there can be a delay of 2 to 90 seconds between the time the status light goes on and the time the controller is online. Table 5. Fan Module Status Light Indications Color Indication Off No power or fan module not operating. Green Normal operation. Amber Fan speed too low. Replace the fan module. 113