HP Surestore Disk Array 12h HP SureStore E Disk Array 12H User's and Service M - Page 121
Power On Sequence Test
View all HP Surestore Disk Array 12h manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Troubleshooting Troubleshooting Power On Sequence Test Power On Sequence Test When the disk array is powered on, it goes through a power on sequence test, during which time various numbers are displayed on the front panel. The numbers step higher as each initialization step is completed. The changing sequence numbers assure you that the disk array is performing the various power-on tests. When the tests have all completed, the front panel will display the word "ready." If the word "ready" is not eventually displayed, the sequence number at which the power on stops will help diagnose what might have went wrong. Sequence Code 1 4 6 10 12 16 20 22 24 26 28 30 32 34 36 38 40 42 Table 9. Power On Sequence Test Description of Power On Sequence Test Performed host SRAM test; parity SRAM test chip register test; data path tests ROM test; copy perf code to SRAM delay for mirror to come up; start mirrored communications check backplane start early spinup local NVRAM pretest remote NVRAM pretest local NVRAM decode test setup remote NVRAM decode test remote NVRAM decode test SIMM 1, 1st half test SIMM 1, 2nd half test (32 MB SIMMs only) SIMM 2, 1st half test SIMM 2, 2nd half test (32 MB SIMMs only) remote SIMM 1, 1st half test remote SIMM 1, 2nd half test (32 MB SIMMs only) remote SIMM 2, 1st half test 121