HP TC1100 HP Compaq tc1100 Tablet PC - Maintenance and Service Guide - Page 120
at a 45-degree angle., Pull the memory module away from the connector
View all HP TC1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Removal and Replacement Procedures 11. Remove the system main memory by following these steps: a. Spread the retaining tabs 1 securing the main memory board to the system board. The end of the memory board opposite the connector rises at a 45-degree angle. b. Pull the memory module away from the connector at a 45-degree angle 2. Removing the Main Memory Module 5-30 Maintenance and Service Guide
5–30
Maintenance and Service Guide
Removal and Replacement Procedures
11. Remove the system main memory by following these steps:
a.
Spread the retaining tabs
1
securing the main
memory board to the system board.
The end of the memory board opposite the connector rises
at a 45-degree angle.
b.
Pull the memory module away from the connector at
a 45-degree angle
2
.
Removing the Main Memory Module