HP Tc2100 hp server tc2100 NOS installation guide (English) - Page 4

Contents 3 Installing Microsoft Windows 2000 Server and Small Business Server 2000 17 Prepare the Installation 17 High level process flow 17 Section 1. Perform Windows 20000 Installation 17 PHASE 1 - Windows 2000 Installation 18 PHASE 2 - Perform Hardware Status Check 20 PHASE 3 - Initialize Hard Disk Drive 21 PHASE 4 - Adding Terminal Server Services 22 Section 2. Configure the network 23 PHASE 1 - Configure Server IP Address 23 PHASE 2 - Attach Clients to Network and Test Network Link 24 PHASE 3 - Domain Controller Setup 25 Section 3. Completing the Installation 26 PHASE 1 -Install the Service Pack 26 PHASE 2 - Install the HP Video Driver 27 PHASE 3 - Install the HP LAN driver 27 PHASE 4 - Install Windows 2000 Recovery Console 28 Troubleshooting 28 Tip #1. Upgrading from NT 4.0 to Windows 2000 28 Tip #2. Windows 2000 Installation halts about three minutes after starting to boot from CD-ROM 28 Tip #3. Configure the Parallel (LPT) Port for ECP Mode 29 Tip #4. Installing HP NetRAID-1M Driver After Windows 2000 is Installed 30 Tip #5. Windows 2000 Drivers Signatures 30 Tip #6. Windows 2000 Recovery Options 31 Tip #7. Restarting Windows 2000 installation 33 On-Line Information and Software Sources 33 4 Installing Novell NetWare 5.1 and Novell Small Business Suite 5.1 ........ 35 Prepare the Installation 35 High level process flow 35 Section 1. Run HP Diagtools (optional 35 Section 2. Create the Drivers Diskettes 35 Section 3. Perform NetWare 5.1 or Novell Small Business Suite 5.1 Installation36 PHASE 1 - Start the Installation 36 PHASE 2 - Install HP Drivers 37 PHASE 3 - Configure the Network 39 iv