HP Workstation xw6000 Adaptec SCSI RAID 2120S: Installation Guide - Page 66
Specifications
View all HP Workstation xw6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
B Specifications DC Power Requirements Voltage (all DC) 2120S/2200S Ripple and noise 5V ± .5 V 50 mV peak-to-peak maximum All other voltages used on the controller card are generated from the 5V Vcc line on the controller. Current Requirements Adaptec 2120S Adaptec 2200S 2.50 A maximum 2.72 A maximum Environmental Specifications Ambient temperature without battery backup module Relative humidity Altitude 0 °C to 50 ° C 10% to 90%, noncondensing up to 3,000 meters Note: Forced airflow is recommended, but not required. B-1
B-1
B
Specifications
DC Power Requirements
All other voltages used on the controller card are generated from
the 5V Vcc line on the controller.
Current Requirements
Environmental Specifications
Note:
Forced airflow is recommended, but not required.
Voltage (all DC)
2120S/2200S
5V ± .5 V
Ripple and noise
50 mV peak-to-peak maximum
Adaptec 2120S
2.50 A maximum
Adaptec 2200S
2.72 A maximum
Ambient temperature without battery
backup module
0 °C to 50 °
C
Relative humidity
10% to 90%
,
noncondensing
Altitude
up to 3,000 meters