HP ZBook Studio G3 Maintenance and Service Guide - Page 45
Bottom cover, Remove the bottom cover
View all HP ZBook Studio G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Bottom cover Description Bottom cover Spare part number 840959-001 Before removing the bottom cover, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the service door (see Service door on page 30). Remove the bottom cover: 1. Loosen the seven captive Torx screws (1) that secure the bottom cover to the computer. 2. Lift the bottom cover off the computer (2). Reverse this procedure to install the bottom cover. Component replacement procedures 31
Bottom cover
Description
Spare part number
Bottom cover
840959-001
Before removing the bottom cover, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the service door (see
Service door
on page
30
).
Remove the bottom cover:
1.
Loosen the seven captive Torx screws
(1)
that secure the bottom cover to the computer.
2.
Lift the bottom cover
off
the computer
(2)
.
Reverse this procedure to install the bottom cover.
Component replacement procedures
31