HP ZBook Studio G3 Maintenance and Service Guide - Page 53
RTC battery, from the system board.
![]() |
View all HP ZBook Studio G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
RTC battery Description RTC battery (includes cable and double-sided adhesive) Spare part number 840953-001 Before removing the RTC battery, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the service door (see Service door on page 30). 5. Remove the bottom cover (see Bottom cover on page 31). 6. Disconnect the battery (see Battery on page 32). Remove the RTC battery: 1. Disconnect the RTC battery cable (1) from the system board. 2. Detach the RTC battery (2) from the base enclosure. (The RTC battery is attached to the base enclosure with double-sided adhesive.) 3. Remove the RTC battery and cable. Reverse this procedure to install the RTC battery. Component replacement procedures 39
![](/manual_guide/products/hewlettpackard-zbook-studio-g3-maintenance-service-guide-ad621ee/53.png)