HP ZBook Studio G3 Maintenance and Service Guide - Page 71

same location. The removal procedures are the same for both modules.

Get HP ZBook Studio G3 PDF manuals and user guides View all HP ZBook Studio G3 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 71 highlights

CAUTION: Before turning the display panel upside down, make sure the work surface is clear of tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to the display panel. b. Lift the top edge of the display panel (1) and swing it up and forward until it rests upside down in front of the display enclosure. c. Remove the display cable from the clip (2). d. Lift the tape (3), and then disconnect the display panel cable (4) from the display panel. e. Remove the display panel. The display panel is available using spare part numbers 840941-001 (15.6-in, FHD, UWVA, LED display panel) and 840943-001 (15.6-in, UHD, UWVA, LED B display panel). 6. If it is necessary to replace the webcam module or microphone module: NOTE: The webcam module and microphone module are similar in appearance and installed in the same location. The removal procedures are the same for both modules. CAUTION: Handle the module with caution. This module has a thin profile and is susceptible to damage when not handled carefully. a. Detach the webcam or microphone module (1) from the display enclosure. (The module is attached to the display enclosure with double-sided adhesive.) Component replacement procedures 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
CAUTION:
Before turning the display panel upside down, make sure the work surface is clear of
tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to
the display panel.
b.
Lift the top edge of the display panel
(1)
and swing it up and forward until it rests upside down in
front of the display enclosure.
c.
Remove the display cable from the clip
(2)
.
d.
Lift the tape
(3)
, and then disconnect the display panel cable
(4)
from the display panel.
e.
Remove the display panel.
The display panel is available using spare part numbers 840941-001 (15.6-in, FHD, UWVA, LED
display panel) and 840943-001 (15.6-in, UHD, UWVA, LED B display panel).
6.
If it is necessary to replace the webcam module or microphone module:
NOTE:
The webcam module and microphone module are similar in appearance and installed in the
same location. The removal procedures are the same for both modules.
CAUTION:
Handle the module with caution. This module has a thin
proļ¬le
and is susceptible to damage
when not handled carefully.
a.
Detach the webcam or microphone module
(1)
from the display enclosure. (The module is attached
to the display enclosure with double-sided adhesive.)
Component replacement procedures
57