HP ZBook Studio G3 Maintenance and Service Guide - Page 72
Remove the three Torx T8M2.5×4.0 screws, from the display
![]() |
View all HP ZBook Studio G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
b. Disconnect the module cable (2) from the module. c. Remove the module. The webcam module is available using spare part number 840965-001. The microphone module is available using spare part number 840955-001. 7. If it is necessary to replace the thermal board: a. Disconnect the thermal board cable (1) from the board. b. Using a flat tool, pry the board loose (2), and then remove the board (3) from the display enclosure. (The thermal board is attached to the display enclosure with double-sided adhesive.) c. Remove the thermal board. The thermal board is available using spare part number 840956-001. 8. If it is necessary to replace the display hinges: a. Remove the three Torx T8M2.5×4.0 screws (1) that secure each display hinge to the display panel. 58 Chapter 6 Removal and replacement procedures for authorized service provider parts
![](/manual_guide/products/hewlettpackard-zbook-studio-g3-maintenance-service-guide-ad621ee/72.png)