Home » HP Manuals » Desktops » HP dc73 » Manual Viewer

HP dc73 HP Blade Workstation Client series - Embedded OS Version 10.xx - Page 32

Editing the SAM configuration file, IMPORTANT,

Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

IMPORTANT: If SAM Connection Client 2.2.1.2 is selected, SAM will use RGS 5.1.5 to connect to the blade workstations. If you select SAM Connection Client 2.2.1.2, ensure that your blade workstations are also running RGS 5.xx. Note also that the SAM Session Allocation Client interface on the client computer is not localized-it is English only. For information on SAM, see Section 1-7, "Session Allocation Manager documentation." 6-1-1 Editing the SAM configuration file The ability to edit the SAM configuration was added with Embedded OS 9.61. To edit this file, click Edit SAM Config in Figure 6-1. This brings up the edit screen in Figure 6-2. Figure 6-2 SAM configuration file edit screen IMPORTANT: During normal operation, SAM parameters should be changed using the SAM Session Allocation Client. Editing of the SAM configuration file should only be performed if you're unable to change a parameter using the Session Allocation Client, and you're knowledgeable of how SAM works. 32

Section	Page
Introduction	5
Document organization	6
Documentation on the HP Blade Workstation Client series	7
HP Blade Workstation Client documentation	7
HP dc72 Blade Workstation Client documentation	7
HP dc73 Blade Workstation Client documentation	7
Thin client documentation	7
HP ProLiant xw460c Blade Workstation documentation	7
HP Remote Graphics Software documentation	8
Altiris Deployment Solution documentation	9
Session Allocation Manager documentation	9
Obtaining HP technical support	9
Blade workstation solution overview	10
Features of the client computer	10
Embedded OS	11
Webmin	11
Turning on the client computer	12
Hardware setup	12
Turn-on sequence	13
Local and remote access to Webmin	14
Using Webmin	14
Desktop menu	15
Viewing version information	16
Rebooting the client computer	17
Unlocking the client computer case	17
Supported keyboards	18
Configuring the client computer	19
Changing the administrator password	19
Setting the system time parameters	19
Network configuration	20
Assigning a hostname when DHCP provides the IP address	21
Configuring static networking	21
Specifying domain suffixes	21
Setting the network speed	22
Altiris Deployment Server parameters	22
Setting host addresses	22
Adding the client computer to Active Directory	23
Keyboard language selection	23
Downloading and using PSCP (Putty Secure Copy)	23
Downloading PSCP	23
Using PSCP to copy a file to the client computer	24
Modifiable files	24
Settings files	24
Groups of settings files	24
Modifying the settings files	25
Specifying a new background image	25
Monitor layout and client aggregation	26
Monitor layout	26
Client aggregation	28
Connecting to a blade workstation	31
Blade connection settings for Embedded OS 10.50	31
Editing the SAM configuration file	32
Selecting the RGS mode	33
Setting additional RGS parameters	33
Establishing an RGS connection	33
Remote USB	34
Blade workstation remote power button	35
Installing Embedded OS 10.xx	37
Downloading Embedded OS 10.xx from HP	37
Example installation from the USB key	42
Known client computer limitations	46
Regulatory information	47
Federal Communications Commission notice	47
Modifications	47
Cables	47
Canadian notice (Avis Canadien)	47
European Union regulatory notice	47
Appendix A: 9.40 enhancements	48
Appendix B: 9.45 enhancements	49
Appendix C: 9.61 enhancements	50
Appendix D: 10.50 enhancements	51
Appendix E: Sample settings_25_local_custom.txt file	52
Appendix F: Sample settings_30_local_root.txt file	53
Appendix G: Sample settings_35_local_custom.txt file	56
Appendix H: Sample settings_40_local_user.txt file	57
Appendix I: Sample settings_20_site.txt file	58

Match case Limit results 1 per page

IMPORTANT:

If SAM Connection Client 2.2.1.2 is selected, SAM will use RGS 5.1.5 to connect to the blade

workstations. If you select SAM Connection Client 2.2.1.2, ensure that your blade workstations are also

running RGS 5.xx.

Note also that the SAM Session Allocation Client interface on the client computer is not localized—it is English

only.

For information on SAM, see Section 1-7, “

Session Allocation Manager documentation

.”

6-1-1 Editing the SAM configuration file

The ability to edit the SAM configuration was added with Embedded OS 9.61. To edit this file, click

Edit SAM

Config

in Figure 6-1.

This brings up the edit screen in Figure 6-2.

Figure 6-2

SAM configuration file edit screen

IMPORTANT:

During normal operation, SAM parameters should be changed using the SAM Session Allocation

Client. Editing of the SAM configuration file should only be performed if you’re unable to change a parameter

using the Session Allocation Client, and you’re knowledgeable of how SAM works.