HP dx2100 HP Compaq dx2100 MT Business PC Service Reference Guide (1st Edition - Page 34
Native Mode, Control Block are found in the PCI Configuration Space.
View all HP dx2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Serial and Parallel ATA Drive Guidelines and Features 4.8.2 Native Mode The native mode is used to access devices attached to additional ATA controllers and is not supported by many legacy operating systems. Addresses are assigned by PCI Plug-n-Play BIOS and the IRQ is shared with multiple controllers. Base Address Registers for the Command and Control Block are found in the PCI Configuration Space. ■ Offset 10h-Primary Command base address ■ Offset 14h-Primary Control base address ■ Offset 18h-Secondary Command base address ■ Offset 1Ch-Secondary Control base address 4-6 404569-001 Service Reference Guide, dcx210 MT
4–6
404569-001
Service Reference Guide, dcx210 MT
Serial and Parallel ATA Drive Guidelines and Features
4.8.2 Native Mode
The native mode is used to access devices attached to additional ATA controllers and is not
supported by many legacy operating systems. Addresses are assigned by PCI Plug-n-Play BIOS
and the IRQ is shared with multiple controllers. Base Address Registers for the Command and
Control Block are found in the PCI Configuration Space.
■
Offset 10h—Primary Command base address
■
Offset 14h—Primary Control base address
■
Offset 18h—Secondary Command base address
■
Offset 1Ch—Secondary Control base address