HP dx2100 HP Compaq dx2100 MT Business PC Service Reference Guide (1st Edition - Page 57
Front I/O Panel Housing Assembly, Preparation for Disassembly
View all HP dx2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Removal and Replacement Procedures- Microtower (MT) Chassis 6.9 Front I/O Panel Housing Assembly 1. Prepare the computer for disassembly (Section 6.1, "Preparation for Disassembly"). 2. Remove the access panel and rotate the computer so the system board is parallel to the table to make it easier to work on (Section 6.1, "Preparation for Disassembly"). 3. Disconnect two attaching cables from the system board: the power switch/LED cable, and the front USB cable. 4. Remove the two screws 1 that secure the housing to the chassis and then pull the housing 2 away from the chassis. To install the housing assembly, reverse the removal procedures. Service Reference Guide, dx2100 MT 404569-001 6-15
Service Reference Guide, dx2100 MT
404569-001
6–15
Removal and Replacement Procedures— Microtower (MT) Chassis
6.9 Front I/O Panel Housing Assembly
1. Prepare the computer for disassembly (
Section 6.1, “Preparation for Disassembly”
).
2. Remove the access panel and rotate the computer so the system board is parallel to the table
to make it easier to work on (
Section 6.1, “Preparation for Disassembly”
).
3. Disconnect two attaching cables from the system board: the power switch/LED cable, and
the front USB cable.
4. Remove the two screws
1
that secure the housing to the chassis and then pull the housing
2
away from the chassis.
To install the housing assembly, reverse the removal procedures.