HP dx2200 HP Compaq dx2200 MT Business PC, 1st Edition - Page 18

Setup Utilities and Diagnostics Features Heading Integrated Peripherals (continued) Power Management Setup PnP/PCI Configurations Option Onboard Serial Port Onboard Parallel Port Parallel Port Mode ECP Mode Use DMA After AC Power Loss ACPI Suspend Type External Modem S5 Wake-Up RTC Alarm Resume Date (of Month) Resume Time (hh:mm:ss) Reset Configuration Data Description Allows you to select a setting for the onboard serial port: • Disabled • 3F8/IRQ4 • 2F8/IRQ3 • 3E8/IRQ4 • 2E8/IRQ3 Allows you to select a setting for the onboard parallel port: • Disabled • 378/IRQ7 • 278/IRQ5 • 3BC/IRQ7 Allows you to select parallel port mode: • SPP • EPP • ECP • ECP+EPP • Normal If Parallel Port Mode is set to ECP or ECP+EPP, allows you to set the DMA channel for ECP Mode to 1 or 3. Allows you to select system power loss behavior: • On • Off • Last State ACPI sleep mode is S3 (Suspend To RAM) Disables/enables wake-up modem from S5. Disables/enables RTC alarm. If RTC Alarm Resume is enabled, allows you to select the day of the month for resumption of RTC alarm. (Set to 0 for every day.) If RTC Alarm Resume is enabled, allows you to select what time the RTC alarm will resume. Disables/enables automatic reconfiguration. The default is Disabled. Select Enabled to reset Extended System Configuration Data (ESCD) when you exit Setup, if you have installed a new add-on and the system reconfiguration has caused such a serious conflict that the OS cannot boot. 2-8 415606-001 Service Reference Guide, dx2200 MT