HP dx2200 HP Compaq dx2200 MT Business PC, 1st Edition - Page 71

Power Supply

Get HP dx2200 - Microtower PC PDF manuals and user guides View all HP dx2200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 71 highlights

Removal and Replacement Procedures- Microtower (MT) Chassis 6.16 Power Supply Å WARNING: Voltage is always present on the system board when the computer is plugged into an active AC outlet. To avoid possible personal injury and damage to the equipment the power cord should be disconnected from the computer and/or the AC outlet before opening the computer. 1. Prepare the computer for disassembly (Section 6.1, "Preparation for Disassembly"). 2. Remove the access panel (Section 6.2, "Access Panel"). 3. Disconnect all power cables from the mass storage devices and from the system board. 4. Remove the 4 screws 1 that secure the power supply to the chassis. 5. Slide the power supply toward the front of the computer 4, then lift it out of the computer. To install the power supply, reverse the removal procedure. Service Reference Guide, dx2200 MT 415606-001 6-29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
Service Reference Guide, dx2200 MT
415606-001
6–29
Removal and Replacement Procedures— Microtower (MT) Chassis
6.16 Power Supply
Å
WARNING:
Voltage is always present on the system board when the computer is plugged into an
active AC outlet. To avoid possible personal injury and damage to the equipment the power cord should
be disconnected from the computer and/or the AC outlet before opening the computer.
1. Prepare the computer for disassembly (
Section 6.1, “Preparation for Disassembly”
).
2. Remove the access panel (
Section 6.2, “Access Panel”
).
3. Disconnect all power cables from the mass storage devices and from the system board.
4. Remove the 4 screws
1
that secure the power supply to the chassis.
5. Slide the power supply toward the front of the computer
4
, then lift it out of the computer.
To install the power supply, reverse the removal procedure.