HP dx2200 HP Compaq dx2200 MT Business PC, 1st Edition - Page 57
Device, Retainer Screws, Guide Screws
View all HP dx2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Removal and Replacement Procedures- Microtower (MT) Chassis Device Retainer Screws Diskette Drive 2 (labeled "FDD" on chassis) Media Card 2 (labeled "CR" on chassis) Reader Guide Screws 1 (front left side of drive) none ✎ If you are installing a drive in the external 3.5" drive bay for the first time, use a flatblade screwdriver to pry out the metal shield covering the bay. ✎ There are a total of eight extra guide/retainer screws on the front of the chassis behind the bezel. Four have Unified Standard (U.S.) #6-32 standard threads and four have M3 metric threads. U.S. screws are used for hard drives and have a silver finish. Metric screws are used for all other drives and have a black finish. Be sure to install the appropriate guide screws into the drive. Service Reference Guide, dx2200 MT 415606-001 6-15