HP mt20 Maintenance and Service Guide - Page 54
Function board
View all HP mt20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Function board Description Function board Function board cable (included in Cable Kit) Spare part number 905710-001 905707-001 Before removing the function board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Place the computer in "Battery Safe mode" (Battery Safe mode on page 25). 3. Disconnect all external devices connected to the computer. 4. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 5. Remove the following components: a. Service door (see Service door on page 26) b. Keyboard (see Keyboard on page 32) c. Top cover (see Top cover on page 39) Remove the function board: 1. Position the top cover upside-down. 2. Disconnect the cable from the connector on the function board (1). 3. Remove the Phillips PM2.0×3.0 screw (2) that secures the board to the top cover. 44 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts