HP mt20 Maintenance and Service Guide - Page 68
Heat sink assembly
View all HP mt20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Heat sink assembly All heat sink assembly spare part kits include replacement thermal material. Description Heat sink assembly (UMA) Spare part number 910980-001 Before removing the heat sink assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the following components: a. Service door (see Service door on page 26). b. WLAN module (see WLAN/Bluetooth combo card on page 29) c. Keyboard (see Keyboard on page 32) d. Top cover (see Top cover on page 39) e. USB/audio board (see USB/audio board on page 49) f. Battery (see Battery on page 50) g. Fan (see Fan on page 52) h. System board (see System board on page 54) Remove the heat sink assembly: 1. Position the system board upside-down. 2. In the order indicated on the heat sink, loosen the 4 captive Phillips screws (1)-(4) that secure the heat sink to the system board. 58 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts