Honeywell 1900GHD-2 User Guide - Page 77

Flexible Power Management If you are experiencing network performance issues, and suspect the scanner is interfering with other devices, you can turn down the power output of the scanner. This reduces the range between the scanner and a base or an Access Point as shown in the following illustration: 802.11 LAN 1902 Scanner Reduced Power Full Power Scan one of the bar codes below to set the scanner's power output to Full Power (100%) [2.5mW, 4dBm], Medium Power (35%) [.875mW, 0dBm], Medium Low Power (5%) [.125mW, -9dBm], or Low Power (1%, .025mW, -16dBm). Default = Full Power. For the new power setting to take effect, the scanner and the base or Access Point must be reset. See Reset Scanner and Base/Access Point (page 318). * Full Power Medium Low Power Medium Power Low Power 3 - 17