Husqvarna TB 1000 Owners Manual - Page 43
Possible Incidents, Characteristics, Mogelijke Storingen, Eigenschappen
View all Husqvarna TB 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
EN POSSIBLE INCIDENTS Troubleshooting advice PROBLEM REMEDY The machine does not start. Check the start-up process. Check that the safety cut-out is in place. Check that the connectors are connected to the body of the machine. Check whether a wire on the machine is damaged. Check the condition of the fuse on the front of the battery pack. Check the battery charge level (by starting charging). The machine does not reverse. No max speed function. The earth drills do not rotate but the machine is switched on. Check whether a wire on the machine is damaged. The charger does not start up. Check whether a wire on the charger is damaged Check the condition of the fuse on the front of the battery pack. REMARKS If none of these actions solves the problem, please contact an approved repairs centre. CHARACTERISTICS TB1000 technical specifications Weight: 31.5 Kg (incl. batteries 12 Kg) Operating width: 470mm (6 earth drills) - 300mm (4 earth drills) - 220mm (2 earth drills) Earth drill diameter: 240 mm Motor: 36V 800W (approx. 2800 rpm under load) Batteries: 36V 12Ah Charger: input: 110V to 250V at 50 to 60 Hz (output: 36V 1.5Ah) Noise pressure on the operator's ears: 69 dBA NL MOGELIJKE STORINGEN Voorschriften in geval van fouten / storingen PROBLEEM OPLOSSING OPMERKING De machine wil niet starten. Het opstart protocol verifiëren Kijken of de veiligheidssleutel op zijn plaats is aangebracht Kijken of de connectors naar behoren zijn aangesloten op de machine Kijken is er geen enkele draad van de machine beschadigd is Achteruit rijden is niet mogelijk. Geen functie maximale snelheid. De messen draaien niet meer maar de machine is wel aan. De staat van de zekering aan de voorzijde van het accu pack controleren De laad staat van de accu controleren (door een laad proces op te starten). De oplader gaat niet branden . Als het probleem niet kan worden opgelost aan de hand van deze instructies, moet u contact opnemen met een erkende reparateur. Controleren of er geen enkele draad van de machine is beschadigd. Controleren of er geen enkele draad van de machine is beschadigd De staat van de zekering aan de voorzijde van het accu pack controleren. EIGENSCHAPPEN Technische specificaties TB1000 Gewicht : 31.5 kg (waarvan de accu's 12 kg wegen) Werk breedte : 470 mm (6 messen) - 300 mm (4 messen) - 220 mm (2 messen) Diameter messen : 240 mm Motor : 36V 800W (ongeveer 2800 t/min belast) Accu's: 36V 12Ah Oplader : Ingang : 110V tot 250V en frequentie 50 tot 60 Hz (Uitgang: 36v 1,5 Ah) Geluidsdruk op de oren van de bediener: 69 dBA 42