IBM 86481BU Installation Guide - Page 32
Attention
View all IBM 86481BU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
3. Remove the side cover (see "Removing the side cover" on page 13). 4. Remove the support bracket (see "Removing and installing the support bracket" on page 14). 5. Open the microprocessor air baffle. 6. Locate the DIMM connectors on the system board (see "System-board option connectors" on page 7 for the location of the DIMM connectors). 7. Install the DIMMs in the sequence shown in the notes at the beginning of this section. Attention: To avoid breaking the retaining clips or damaging the DIMM connectors, open and close the clips gently. a. Open the retaining clips. b. Turn the DIMM so that the DIMM keys align correctly with the slot. c. Insert the DIMM into the connector, pressing gently but firmly until the retaining clips close. 8. If you have other options to install or remove, do so now; otherwise, close the microprocessor air baffle, replace the support bracket (see "Removing and installing the support bracket" on page 14), and go to "Completing the installation" on page 38. 18 xSeries 226 Type 8648: Installation Guide