IBM 86481BU Installation Guide - Page 84
Configuration/Setup
View all IBM 86481BU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
1 2 3 CMOS data (JCMOS1) Default (pins 1 and 2) Clear CMOS data (pins 2 and 3) 6. Move the CMOS recovery jumper from pins 1 and 2 to pins 2 and 3. 7. Wait 60 seconds; then, return the CMOS recovery jumper to pins 1 and 2. 8. Replace any adapters or objects that were removed; then, replace the support bracket and replace the side cover. (See "Removing and installing the support bracket" on page 14 and "Replacing the side cover" on page 39.) You can now start the server one time without having to use the user password and start the Configuration/Setup Utility program. At this time, you can either delete the old password or set a new user password. If you do not change or delete the password, the next time you start the server, the original user password will be reinstated. 9. Connect the server to a power source, keyboard, monitor, and mouse. 10. Turn on the server. The Configuration/Setup Utility program starts. 11. Follow the instructions to erase the existing password or create a new password. 12. Select Save Settings and press Enter. 70 xSeries 226 Type 8648: Installation Guide