IBM 86803RU Hardware Maintenance Manual - Page 102
Two-Pin Jumper Blocks, Three-Pin Jumper Blocks
![]() |
UPC - 087944453369
View all IBM 86803RU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
To change a three-pin jumper block, go to "Three-Pin Jumper Blocks" on page 95. Two-Pin Jumper Blocks: Covering both pins with a jumper defines one function of the jumper block. To change the function of the jumper block, cover one pin only or remove the jumper entirely. The following illustration identifies pins 1 and 2 on a two-pin jumper block. 21 To change the jumper position on a two-pin jumper block: 1. Lift the jumper straight off the block and then do one of the following: Align the holes in the bottom of the jumper with the two pins on the pin block, and then slide the jumper carefully onto these pins. Align one of the holes in the bottom of the jumper with one of the pins on the pin block, and then slide the jumper carefully onto that pin only. 94 Netfinity Server HMM
![](/manual_guide/products/ibm-86803ru-hardware-maintenance-manual-dc70288/102.png)