IBM 86803RU Hardware Maintenance Manual - Page 192
If Memory Card LED, Beep/Symptom
UPC - 087944453369
View all IBM 86803RU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
Beep/Symptom 2-4-1 (Video failed, screen believed operable) 3-1-1 (Timer tick interrupt failed) 3-1-2 (Interval timer channel 2 failed) 3-1-3 (RAM test failed above address 0FFFFH) 3-1-4 (Time-Of-Day clock failed) 3-2-1 (Serial port failed) 3-2-2 (Parallel port failed) 3-2-3 (Math coprocessor failed) 3-2-4 (Failure comparing CMOS memory size against actual) 3-3-1 (Memory size mismatch occurred) 3-3-2 (Critical SMBUS error occurred) Three Short Beeps One Continuous Beep FRU/Action 1. I/O Function Card 1. I/O Function Card 2. I/O Board 1. I/O Function Card 2. I/O Board 1. If Memory Card LED is on, replace DIMM 2. Memory Card 1 3. Memory Card 2, if installed 4. Processor Board 1. Battery, see "Battery" on page 89. 2. I/O Function Card 1. I/O Function Card 1. I/O Function Card 1. Processor 2. Processor Board 1. If Memory Card LED is on, replace DIMM 2. Memory Card 1 3. Memory Card 2, if installed 4. Processor Board 5. Battery, see "Battery" on page 89. 1. If Memory Card LED is on, replace DIMM 2. Memory Card 1 3. Memory Card 2, if installed 4. Processor Board 5. Battery, see "Battery" on page 89. 1. Disconnect the server power cord from outlet, wait 30 seconds and retry. 2. See "SMBUS Error (3-3-2)" on page 204. 1. If Memory Card LED is on, replace DIMM 2. Memory Card 1 3. Memory Card 2, if installed 4. Processor Board 1. Processor 2. Processor Board 184 Netfinity Server HMM