IBM 86803RU Hardware Maintenance Manual - Page 67
Initialization String Guidelines, Changing Dialout Entry Settings
UPC - 087944453369
View all IBM 86803RU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Item Dial-in delay (minutes) Description The Dial-in delay (minutes) field shows the number of minutes that must pass after an incorrect User ID or Password has been used in five successive dial-in attempts before valid dial-in access will be permitted. After the fifth successive login failure, dial-in access is disabled for the number of minutes that you specify, the system management subsystem adds an entry in the Event Log noting that dial-in access was suspended due to five successive login failures, and the system management subsystem attempts to forward an alert if the Tamper Enabled Alerts Dialout check box has been checked (see Figure 4 on page 60). Initialization String Guidelines: If you need to provide a new initialization string, refer to the user's guide that came with your modem. Your initialization string must contain commands that configure your modem as follows: Command echoing OFF Online character echoing OFF Result codes ENABLED Verbal result codes ENABLED All codes and Connect messages with BUSY and DT detection Protocol identifiers added - LAPM/MNP/NONE V42bis/MNP5 Normal CD operations DTR ON-OFF hang-up, disable AA and return to command mode CTS hardware flow control RTS control of receive data to computer Queued and nondestructive break, no escape state Note The acronyms in these commands have the following meanings: AA CD CTS DT DTR RTS Auto Answer Carrier Detect Clear to Send Data Transfer Data Terminal Ready Ready to Send Changing Dialout Entry Settings: To apply settings to a selected Dialout Entry: 1. Specify Modem Settings. 2. Specify Dialing Settings. 3. Click on Apply to save these settings and return to the Automatic Dialout Settings window. Netfinity 7000-M10 - Type 8680 59