IBM 86803RU Hardware Maintenance Manual - Page 57

Notes 1. Be sure to check the System Management Processor check box in the Netfinity Serial Connection Control window when you create the Serial Connection Control entry. If this check box is not checked, the connection with the remote system management subsystem will fail. A null modem connection does not require that this box be checked. 2. When using Serial Connection Control to configure a Dialout Entry for use by the Advanced System Management service, be sure to enter the Login ID and Password for access to the remote system's system management subsystem, not the User ID and Password for access to Netfinity services on the remote system. 3. When creating a Serial Connection Control entry to establish a null modem connection to a remote system's Advanced System Management Adapter or controller, make sure that the Port Baud Rate value (configured using the Serial Connection Control service) is set to match the Baud Rate value (configured using the Advanced System Management service) of the target system. If the Port Baud Rate and the Baud Rate values do not match, the connection will fail. Configuration Information: The Configuration Information window (shown in Figure 1) contains detailed information about the system management subsystem, including RAM microcode, ROM microcode, and device-driver information. Configuration Information - SP NULL modem Service Processor Vital Product Information ROM Firmware RAM Firmware Revision : 1 Part Number : 76H6130 File Name : $80C5102.BIN Date : 09-09-96 Check Sum : 0 Revision : 10 Part Number : 76H6848 File Name : $80C5102.BIN Date : 08-13-97 Check Sum : 80 Hardware Revision : 244 Device Driver Version : 1.0 OS2 Cancel Help Figure 1. The Configuration Information window Netfinity 7000-M10 - Type 8680 49