IBM 86803RU Hardware Maintenance Manual - Page 164
does not move or shift., Install the memory board
UPC - 087944453369
View all IBM 86803RU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
surface on the server; then, remove the microprocessor from the package. b. Insert the microprocessor into the guides 7 and gently press the microprocessor into the socket. When correctly inserted, the microprocessor heat sink faces to the left. Attention Make sure the microprocessor is oriented and aligned correctly before you try to press it into the socket. c. Push the latches 3 until they close and lock in place. 8. Install the microprocessor retention bracket: a. Insert the bottom edge of the bracket in the matching openings in the guide support. b. Rotate the bracket over the microprocessors. c. Grasp the bracket handle and press the bracket firmly into place. Insert both tabs on the bracket in the matching openings on the server chassis. Note When correctly installed, the bracket holds the microprocessors securely in place and does not move or shift. 9. Install the memory board: a. Insert the memory board into the guides and gently press the memory board into the socket. Attention When you install the memory board in the server, be sure that it is completely and correctly seated in the connector before you apply force to close the latches. Incomplete insertion might cause damage to server components. b. Push the memory board latches 1 until they close and lock in place. 10. If you have other options to install or remove, do so now; otherwise, go to "Completing the Installation" on page 97. 156 Netfinity Server HMM