IBM 86803RU Hardware Maintenance Manual - Page 47
ASCSI Disk Utilities, Advanced Configuration Options
![]() |
UPC - 087944453369
View all IBM 86803RU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
The default value is Automatic. Do not change this value. Boot Device Configuration Select this choice to configure startable device parameters. Before you can make updates, you must know the ID of the device whose parameters you want to configure. SCSI Device Configuration Select this choice to configure SCSI device parameters. Before you can make updates, you must know the ID of the device whose parameters you want to configure. Note When the Maximum Sync Transfer Rate is set to 40.0, this value represents the transfer rate for UltraSCSI devices. When the Maximum Sync Transfer Rate is set to 20.0, this value represents the transfer rate for Fast SCSI devices. Advanced Configuration Options Select this choice to view or change the settings for advanced configuration options. These options include enabling support for large hard disk drives and support for drives with UltraSCSI speed. To reset the SCSI controller defaults, press F6; then, follow the directions on the screen. SCSI Disk Utilities: To see the IDs that are assigned to each SCSI device or to format a SCSI device, select SCSI Disk Utilities from the SCSISelect Utility menu. To use the utility, select a drive from the list. Read the screens carefully before making a selection. Note If the following screen appears, you might have pressed Ctrl+A before the selected drives were ready. Restart the server and watch the SCSISelect messages as each drive spins up. After the drive that you want to view or format spins up, press Ctrl+A. Netfinity 7000-M10 - Type 8680 39
![](/manual_guide/products/ibm-86803ru-hardware-maintenance-manual-dc70288/47.png)