IBM 86803RU Hardware Maintenance Manual - Page 78
Establishing a Direct Connection to the, Netfinity Advanced System Management, PCI Adapte
![]() |
UPC - 087944453369
View all IBM 86803RU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Establishing a Direct Connection to the Netfinity Advanced System Management PCI Adapte: You can establish a direct connection to the Netfinity Advanced System Management PCI Adapter in one of three ways: Connect using a serial connection and a terminal program Connect using a TCPIP network connection and a TELNET session Connect using a TCPIP network connection and a web browser Using a Terminal Program to Connect: To use a terminal program to establish a connection with the system management subsystem: 1. Use a terminal program to establish a connection with the system management subsystem modem. Use the following modem settings: Baud 57.6 k Data Bits 8 Parity None Stop Bits 1 Flow Control Hardware 2. Dial the Netfinity Advanced System Management PCI Adapte. 3. Log in to the system management subsystem. When you have established a connection with the system management subsystem, you will be prompted for a username and password. You must provide a username and password combination that has been previously configured for use with the system management subsystem. You can use one of two username and password combinations: The default username (USERID) and password (PASSW0RD) Note The default username and password are case sensitive. You must use all caps, and the "0" in PASSW0RD is the numeral zero. A username and password that you define using the Advanced System Management service and Netfinity Manager 70 Netfinity Server HMM
![](/manual_guide/products/ibm-86803ru-hardware-maintenance-manual-dc70288/78.png)