IBM 86803RU Hardware Maintenance Manual - Page 88

Netfinity Advanced System Management Token Ring Connection Option The Netfinity Advanced System Management Token Ring Connection includes an IBM Turbo 16/4 Token Ring PC Card that you install in the PCMCIA slot on the Advanced System Management PCI Adapter. The option also includes a PC Card to 9-pin D-shell cable that you first connect to the PC card and then route through the rear chassis cut-out on the server. Finally, the option includes a complete copy of Netfinity Manager version 5.20.2. The licensed version of Netfinity Manager, shipped with the option replaces the licensed version of Netfinity Manager that comes with ServerGuide (included with the Netfinity server). The version of Netfinity Manager, shipped with the option, includes advanced features that enable you to configure and control the Advanced System Management PCI Adapter. Attention After you have installed the Netfinity Advanced System Management Token Ring Connection, you must not enable or use the Ethernet port that is included on the Advanced System Management PCI Adapter. Enabling the Ethernet port while the IBM Turbo 16/4 Token Ring PCMCIA card is installed on the adapter will cause the system to become unstable. To enable, configure, or use the Ethernet port, you must first remove the IBM Turbo 16/4 Token Ring PCMCIA card from the Advanced System Management PCI Adapter. The option ships with the following components: IBM Turbo 16/4 Token Ring PC Card Token Ring Cable Safety Information Booklet Netfinity Manager CD-ROM Installation Instructions Attention Before proceeding, read the safety information included with the option. To install the Netfinity Advanced System Management Token Ring Connection, do the following: 1. Use the Netfinity Manager Advanced System Manager service to disable the Ethernet network interface (if it is enabled). This step is necessary only if you have used the Advanced System Management service previously to 80 Netfinity Server HMM