IBM 86807RY Hardware Maintenance Manual - Page 104

correctly seated., server, be sure that it is completely

Get IBM 86807RY - Netfinity 7000 M10 PDF manuals and user guides
UPC - 087944491972
View all IBM 86807RY manuals
Add to My Manuals
Save this manual to your list of manuals

Page 104 highlights

3. Slide the jumper fully onto these pins. 4. If you removed the I/O function card, install it: a. Refer to the illustration in step 2a on page 93 while you perform the steps in this procedure. b. Carefully grasp the I/O function card by its top edge, and insert the tabs 3 on the bottom edge of the metal connector plate into the matching openings on the back panel. c. Align the I/O function card with the guide on the opposite end of the adapter and the slot on the I/O board. d. Press the I/O function card firmly into the slot. Attention When you install the I/O function card in the server, be sure that it is completely and correctly seated. Incomplete insertion might cause damage to server components. e. Insert the two screws you removed in step 2c on page 93. f. Connect the cables you disconnected in step 2b on page 93. 5. Reinstall the server top cover or front access cover and connect the cables (see "Completing the Installation" on page 97). 96 Netfinity Server HMM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
3.
Slide the jumper fully onto these pins.
4.
If you removed the I/O function card, install it:
a.
Refer to the illustration in step 2a on page
93
while you perform the steps in this procedure.
b.
Carefully grasp the I/O function card by its top
edge, and insert the tabs
±3²
on the bottom
edge of the metal connector plate into the
matching openings on the back panel.
c.
Align the I/O function card with the guide on the
opposite end of the adapter and the slot on the
I/O board.
d.
Press the I/O function card
firmly
into the slot.
Attention
When you install the I/O function card in the
server, be sure that it is completely and
correctly seated.
Incomplete insertion might
cause damage to server components.
e.
Insert the two screws you removed in step 2c on
page 93.
f.
Connect the cables you disconnected in step 2b
on page
93.
5.
Reinstall the server top cover or front access cover
and connect the cables (see “Completing the
Installation” on page
97).
96
Netfinity Server HMM