IBM 86807RY Hardware Maintenance Manual - Page 75

Function Power off with O/S shutdown Power off now Restart the system with O/S shutdown Restart the system now Description Performs an O/S shutdown before removing power from the system. Immediately removes power from the system. Performs an O/S shutdown, removes power from the system, and then restores power to the system. Immediately removes and then restores power to the system. If you are connected to the system management subsystem through a modem, the Power on now selection will also be available. This function powers up the system and allows the microprocessor to perform POST, loading, and O/S startup procedures. To initiate a Power Control Option: 1. Check the Enable power control options check box. Note To initiate any of the power control options, you must first check the Enable power control options check box. If this check box is unchecked, the Power Control Options field will not be available. 2. From the Power Control Options field, select the Power Control Option you want to activate. 3. Click on Apply. Remote POST Console: You can use the Advanced System Management Remote POST Console function to remotely monitor, record, and replay all textual output generated during POST. To monitor and record the POST data on a remote system: 1. Connect to the remote system's system management subsystem. 2. Open the Remote POST window. 3. Restart the remote system (using the Advanced System Management's System Power Control functions). All POST data will be displayed in and recorded by the Remote POST Console as the remote system completes POST. While you are monitoring POST on a remote system, all local keystrokes are relayed automatically to the remote system, enabling you to interact with the POST process on the remote system. To review data after POST completes, disconnect from the remote system and use the Replay functions. Netfinity 7000-M10 - Type 8680 67