IBM 86807RY Hardware Maintenance Manual - Page 152
I/O Board Removal, Before you begin
![]() |
UPC - 087944491972
View all IBM 86807RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
I/O Board Removal Before you begin: Read "Safety Information" on page 226. Note Be sure to update the BIOS to the latest level when replacing this FRU. To Remove the I/O board, do the following: 1. Power-off the system. 2. Disconnect all power to the system. 3. Remove the top cover, see "Removing the Top Cover" on page 161. 4. Disconnect all I/O board cables. 5. Disconnect all cables attached to adapters installed on the I/O board, then, remove the adapters. 6. Remove the shuttle assembly, see "Shuttle Assembly Removal" on page 169. 7. Remove the twelve I/O board screws 1 . 8. Remove the I/O board retainer 2 and lift the I/O board out of the server. 144 Netfinity Server HMM
![](/manual_guide/products/ibm-86803ru-hardware-maintenance-manual-dc70288/152.png)
I/O Board Removal
Before you begin:
Read “Safety Information” on page
226.
Note
Be sure to update the BIOS to the latest level when
replacing this FRU.
To Remove the I/O board, do the following:
1.
Power-off the system.
2.
Disconnect all power to the system.
3.
Remove the top cover, see “Removing the Top
Cover” on page
161.
4.
Disconnect all I/O board cables.
5.
Disconnect all cables attached to adapters installed
on the I/O board, then, remove the adapters.
6.
Remove the shuttle assembly, see “Shuttle Assembly
Removal” on page
169.
7.
Remove the twelve I/O board screws
±1²
.
8.
Remove the I/O board retainer
2
and lift the I/O board
out of the server.
144
Netfinity Server HMM