IBM 86807RY Hardware Maintenance Manual - Page 79
Using a TELNET Session to Connect, Advanced System Management PCI Adapter Menus
![]() |
UPC - 087944491972
View all IBM 86807RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Important For security purposes, change the username and password using the Advanced System Management service. For more information, see "Configuration Settings" on page 50. If you update the system management subsystem microcode, the default username (USERID) and password (PASSW0RD) are reset. If you had previously changed them, you will need to change them again. When you have logged in, you will be presented with the Netfinity Advanced System Management PCI Adapter menu system. For more information, see "Netfinity Advanced System Management PCI Adapter Menus" on page 73 Using a TELNET Session to Connect: To use a TELNET session to establish a connection with the system management subsystem: 1. TELNET to the TCPIP address that has been assigned to the Netfinity Advanced System Management PCI Adapter. 2. Log in to the system management subsystem. When you have established a connection with the system management subsystem, you will be prompted for a username and password. You must provide a username and password combination that has been previously configured for use with the system management subsystem. You can use one of two username and password combinations: The default username (USERID) and password (PASSW0RD) Note The default username and password are case sensitive. You must use all caps, and the "0" in PASSW0RD is the numeral zero. A username and password that you define using the Advanced System Management service and Netfinity Manager Netfinity 7000-M10 - Type 8680 71
![](/manual_guide/products/ibm-86803ru-hardware-maintenance-manual-dc70288/79.png)