IBM 86807RY Hardware Maintenance Manual - Page 63

Modem Settings - SP NULL modem Port Configuration Port Configure : 1 Port selected Baud rate : 9600 Null modem Initialization string : &FE0&C1&D2&H38Q9S0=0 Caller ID string : Dialing Settings Dialin enabled Dialout retry limit : Dialout retry delay : Own port when booted 0 Dialout number spacing : 15 30 Dialin delay (minutes) : 0 Apply Refresh Cancel Help Figure 3. The Modem Settings window The Port Configuration Group: Use the Modem Settings group to specify and configure the modem that will be used to forward the alert when a System Management Subsystem Dialout Event occurs. The Port Configuration group contains the following items. Item Port to configure Baud rate Description Use the spin buttons to select the port that your modem is configured to use. This spin button will show only values that are available for use by your system management subsystem. The port that you select to use affects the availability of the modem for use by either the system management subsystem or the operating system. You can select Port A, Port B, or Port C. If you select Port A on a Netfinity 7000 server, the modem will be available for use by the operating system until the system management subsystem uses the modem for the first time. After the system management subsystem takes control of the modem, the operating system will not be able to access or use the modem until the operating system is restarted. If you select Port B on a Netfinity 7000 server, the modem will be dedicated for use by the operating system only. The system management subsystem will not be able to access a modem that is configured to use Port B. If you select Port C on a Netfinity 7000 server, the modem will be dedicated for use by the system management subsystem only. The operating system will not be able to access a modem that is configured to use Port C. Use the spin buttons to specify the baud rate of the modem. Netfinity 7000-M10 - Type 8680 55