IBM 86807RY Hardware Maintenance Manual - Page 134
Screws, Position a nut bar behind the slide-bracket
UPC - 087944491972
View all IBM 86807RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Notes 1. Get another person to help you attach the slide-bracket assemblies to the rack. 2. The slide-bracket assemblies can be installed on either the left or right side of the rack. 3. Refer to the illustrations for examples of the proper alignment of the slide-bracket assemblies. b. If necessary, loosen the screws at the rear of the slide-bracket assembly and adjust the length of the slide bracket to fit the mounting rail. Tighten the screws. Screws c. Position a nut bar behind the slide-bracket assembly. d. Insert two screws (M6 by 16 mm) through the mounting rail, slide-bracket assembly, and nut bar. Do not tighten the screws. 126 Netfinity Server HMM
Notes
1.
Get another person to help you attach
the slide-bracket assemblies to the
rack.
2.
The slide-bracket assemblies can be
installed on either the left or right side
of the rack.
3.
Refer to the illustrations for examples
of the proper alignment of the
slide-bracket assemblies.
b.
If necessary, loosen the screws at the rear of the
slide-bracket assembly and adjust the length of
the slide bracket to fit the mounting rail.
Tighten
the screws.
Screws
c.
Position a nut bar behind the slide-bracket
assembly.
d.
Insert two screws (M6 by 16
mm) through the
mounting rail, slide-bracket assembly, and nut
bar.
Do not tighten the screws.
126
Netfinity Server HMM