IBM 86807RY Hardware Maintenance Manual - Page 160
gently press the memory board into the socket., When you install the memory board in
UPC - 087944491972
View all IBM 86807RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
b. Insert the DIMM into the connector by pressing on one edge of the DIMM and then on the other edge of the DIMM. Be sure to press straight into the connector. c. Repeat the preceding step to make sure the DIMM is seated correctly. d. Make sure the retaining clips 2 are in the closed position. e. If a gap exists between the DIMM and the retaining clips, the DIMM has not been properly installed. In this case, open the retaining clips and remove the DIMM; then, reinsert the DIMM. f. Repeat these steps for each memory module that you install. 5. Reinstall the memory board: a. Insert the memory board into the guides and gently press the memory board into the socket. Attention When you install the memory board in the server, be sure that it is completely and correctly seated in the connector before you apply force to close the latches. Incomplete insertion might cause damage to server components. b. Push the latches 1 until they close and lock in place. 6. If you have other options to install or remove, do so now; otherwise, go to "Completing the Installation" on page 97. 152 Netfinity Server HMM