IBM 86807RY Hardware Maintenance Manual - Page 129
Input/Output Connectors and Expansion Slots, attach the Advanced Remote Management
![]() |
UPC - 087944491972
View all IBM 86807RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Input/Output Connectors and Expansion Slots The following illustration shows the expansion slots and the input/output connectors (ports) on the rear of the server. 1 External Connector Knockout: Your server has an external connector knockout that can be used when you install the token-ring system management adapter option. 2 SCSI Connector: External SCSI devices attach here. 3 Serial A Connector: Serial signal cables for modems and other serial devices connect here to the 9-pin serial port A connector. See "Devices and I/O Ports" on page 27 for port assignment information. If you are using a 25-pin signal cable, you need a 9-pin-to-25-pin adapter cable. 4 10/100 Ethernet Connector: This connector is to attach the Advanced Remote Management Controller to a network hub for remote communication. Note The 10/100 Ethernet connector cannot be accessed from the network operating system. The connector is dedicated to connecting your Advanced Remote Management Controller to an Ethernet network through a service-processor interface, such as Netfinity Manager. Netfinity 7000-M10 - Type 8680 121
![](/manual_guide/products/ibm-86803ru-hardware-maintenance-manual-dc70288/129.png)