IBM 86807RY Hardware Maintenance Manual - Page 54
For Microsoft Windows NT operating system, For Novell NetWare operating system
UPC - 087944491972
View all IBM 86807RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Note For additional information, review the README file on the diskette. 2. At a command prompt, type the following command and then press Enter: For OS/2 operating system a:\os2\setup For Microsoft Windows NT operating system a:\nt\setup For Novell NetWare operating system load a:\netware\setup 3. You will receive a prompt indicating the location (path and directory) where the device drivers (files) will be placed, and asking you if you want the files to be placed there. If you want the files to be placed in the indicated directory, press Enter. If you want the files to be placed in a different directory, specify the desired directory name; then, press Enter. Be sure to use a valid directory name, and include the complete path. 4. The required device drivers (files) for your operating system will be copied onto the hard disk, in the directory that you selected in step 3. For OS/2 operating system The system will also update the CONFIG.SYS file. For Microsoft Windows NT operating system The system goes into the registry, and all device drivers are loaded automatically. The device drivers will run immediately. For Novell NetWare operating system The system will also update the AUTOEXEC.NCF file. 5. Remove the diskette from the diskette drive. 6. If you have the Microsoft Windows NT operating system, go to step 8. 7. If you have the OS/2 operating system or the Novell NetWare operating system: a. Perform the shutdown procedure that your operating system uses. Refer to your operating-system documentation for instructions. b. Press Ctrl+Alt+Del to restart your server. The device drivers are loaded automatically during server startup. 8. You have completed the device-driver installation procedure. 46 Netfinity Server HMM