IBM 86807RY Hardware Maintenance Manual - Page 45

5. Remove the device or adapter. Some configurations are not supported. If you must remove an adapter, see "Working with Adapters" on page 173. Resolving Software Configuration Conflicts: The memory-address space and IRQs used by some hardware options might conflict with addresses defined for use through application programs or the expanded memory specification (EMS). (EMS is used only with DOS.) If a conflict exists, one or more of the following conditions might exist: The system cannot load the operating system. The system does not work. An application program does not operate, or it returns an error. Screen messages indicate a conflict exists. To resolve conflicts, you can change the software or hardware configuration. Note Start the Configuration/Setup Utility program to view the addresses used by the server functions. (See "The Configuration/Setup Utility Program" on page 25 for instructions.) The best way to resolve memory-address conflicts is to change the addresses used by the application program or the device driver. You can use the Configuration/Setup Utility program to change addresses. If a device driver is causing a memory-address conflict, refer to the operating-system documentation or the documentation that comes with the device drivers. Netfinity 7000-M10 - Type 8680 37