IBM 8852 User Guide - Page 38
Removing a blower module, Press the release button on the blower handle and rotate the handle to
UPC - 883436027069
View all IBM 8852 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Removing a blower module Your BladeCenter might be equipped with standard blower modules (part number 44E5083), or it might be equipped with high-efficiency blower modules (part number 68Y8205). The standard and high-efficiency blower modules are not interchangeable and should not be mixed in the same BladeCenter unit. To remove a blower module, complete the following steps. Handle (open) Release button 1. Read the safety information that begins on page v and "Installation guidelines" on page 18. 2. Press the release button on the blower handle and rotate the handle to the open position (rotate to the right for the upper blower module or to the left for the lower blower module). 3. Using the handle, pull the blower module out of the bay. Removing an I/O module To remove an I/O module or module filler, complete the following steps. Single module filler Double module filler I/O module I/O module Release handle (open) Module filler Release handles (open) 1. Read the safety information that begins on page v and "Installation guidelines" on page 18. 22 BladeCenter H Type 8852, 7989, and 1886: Installation and User's Guide