IBM E02HRLL-G Administration Guide - Page 59

2. Click the View details icon next to a certificate. The Console displays the Viewing Certificate Details window. 3. Click the Edit icon to edit the digital certificate. 4. Update the following parameters in the window, then click Save. Table 6. Digital Certificate Parameters Parameter Certificate name Description Status Description Specify the name of the certificate. Provide brief description about the certificate. Select Enabled to show the status (valid or invalid) of the certificate. Select Disabled to disable the certificate. Disabling a digital certificate About this task If you do not want to use a digital certificate, use the following procedure to disable it. 1. Click Account Admin > Profiles > Certificates. The Console displays the Digital Certificate List. 2. Click the View details icon next to the certificate you want to disable. 3. Click the Edit icon to edit certificate details. 4. For Status select Disabled. 5. Click Save. Note: When a primary certificate is disabled, the corresponding secondary certificate is made primary. When a secondary certificate is disabled, a warning is displayed that there is no secondary certificate. Changing B2B attribute values About this task To change the attribute values in a Document Definition, use the following procedure. Note: Changes to the attribute values for a higher-level Document Definition will be inherited by the lower-level definitions within the same node. 1. Click Account Admin > Profiles > {Partner} >B2B Capabilities. The Console displays the B2B capabilities window. 2. Click to individually expand a node to the appropriate Document Definition level or select a number from 0-4 or All to expand all displayed Document Definition nodes to the selected level. 3. Click the Edit icon to modify the appropriate attribute values in the Update column. 4. Click Save. Chapter 5. Account administration tasks 53